One cone marks a single point. With a bar or a chain between cones you close off a whole line, an extra base keeps a cone in place, and a lamp on top makes it visible at night. These are the parts that fit our cones.
The ATO 3800 (white-red) and ATO 3800/B (yellow-black) link two cones and extend from 120 to 190 cm. Each end has a ring that slips over the top of the cone. They are made of PE and PP and weigh 0.4 kg, so one person can move them.
The ATO 3951 is a black PVC plate, 38 x 38 x 5 cm and 4 kg, with a round opening in the middle. You slip it over the cone and let it settle on the cone's base. It is useful when you already have cones without a weighted base and want them to hold better in the wind.
The ATZ 101A screws into the Ø35 mm thread on top of the cone, leaving a ring above it for a chain or a barrier tape. It measures Ø5.1 x 5.4 cm, is made of red PPC and weighs 50 g. On the orange cones, cut off the moulded loop on top first. Chains are under plastic chains.
The ATZ 404-Y (yellow) and ATZ 404-R (red) screw into the same thread. The 1 W solar panel charges the battery by day and the lamp flashes at night. Each weighs 0.85 kg.
The plastic signs fit the same thread. If you want them ready assembled, see the cone and sign sets. We deliver within 24-48 hours.
With the ATO 3800 or ATO 3800/B extendable bar, 120-190 cm, or with a plastic chain passed through the slot in the body of the cone.
With the 4 kg ATO 3951 weight base, which you slip over the cone until it settles on the cone's base.
Yes, on the orange cones cut off the loop first; the thread is underneath. The parking cones and marker cones have the thread open.
No. The 1 W solar panel charges the battery by day and the lamp flashes at night.
Atto Trafic supplies complete road signage and safety equipment — signs, traffic signs, markings, parking barriers, speed bumps, mirrors, bollards and accessories.