A reflective tape sends headlight beams back to the driver, so a column, a barrier or a parked lorry shows up in the dark from a distance. Every roll is 46 m long. They differ in colour, width and what they are meant for.
They go on columns, barriers, gates, ramps and docks, at +5 °C or above, on smooth, clean surfaces. Not for asphalt.
Yellow (ATO 8406, ATO 8410), red (ATO 8407, ATO 8411), metallic silver (ATO 8408, ATO 8412) and white (ATO 8409), in 5 or 10 cm. They have an aggressive adhesive and are applied at 10-30 °C on flat, clean, rust-free surfaces with no rivets. The honeycomb pattern of small hexagonal cells is the one you see on lorries, trailers and emergency vehicles, and the metallic silver version looks discreet by day on any bodywork colour.
The ATO 8413 (yellow, sides and rear), ATO 8414 (red, rear) and ATO 8415 (white, sides), 5 cm wide, with the E11 mark printed on the tape. At least 80% of the vehicle length is marked on the sides, and the rear gets a full outline.
For fixed obstacles, the striped tapes. For a vehicle's visibility, honeycomb tape. For the required conspicuity marking on lorries and trailers, ECE 104 tape. For floor markings without reflection, see the floor marking tapes. We deliver within 24-48 hours.
White or yellow on the sides, red or yellow at the rear. Yellow, the ATO 8413, can be used in both places.
Both are for vehicles. ECE 104 tape is approved for the required conspicuity marking, while honeycomb tape (for example the ATO 8406) adds extra visibility.
The striped tapes on smooth, clean surfaces at +5 °C or above, but not on asphalt. The honeycomb tapes at 10-30 °C on flat, rust-free surfaces with no rivets.
All reflective tapes come on 46 m rolls, 5 or 10 cm wide.
Atto Trafic supplies complete road signage and safety equipment — signs, traffic signs, markings, parking barriers, speed bumps, mirrors, bollards and accessories.