One-Component Road Marking Paint
One-component road marking paint
One-component paint is the most widely used for markings: it has no catalyst, goes on straight from the pail, by machine or by hand, and dries as the solvent evaporates. The ATP 1K paints are made from pure acrylic resin with a matt finish, and comply with BS EN 1871.
Colours
- ATP 1K-9016 – white RAL 9016, for lines, crossings and car parks;
- ATP 1K-1023 – yellow RAL 1023, for temporary markings and no-stopping zones;
- ATP 1K-5017 – blue RAL 5017, for reserved bay backgrounds;
- ATP 1K-6024 – traffic green RAL 6024, for cycle lanes;
- ATP 1K-6001 – emerald green RAL 6001, for coloured areas;
- ATP 1K-9017 – black RAL 9017, for outlines.
Consumption and drying
At a 400 µm wet film, white uses 641 g/m² and the colours 599 g/m², so a 25 kg pail covers 39-41 m², roughly 400 m of 10 cm line. It dries in 30 minutes at 10 °C, 25 at 25 °C and 5 at 45 °C.
What else you need
ATP AC90 glass beads, dropped onto the fresh coat, make the marking visible at night. The ATP PRIMER goes on first on concrete and on very old or polished asphalt.
Application
The surface must be dry and clean, between 5 and 45 °C, with humidity below 80%. Stir the paint well with a mechanical stirrer and thin it by 3% at most. For heavy-traffic areas, choose two-component road marking paint, and for ready-made symbols, preformed markings. We deliver within 24-48 hours.
? Frequently asked questions
How far does a 25 kg pail go?
At a 400 µm wet film, about 39 m² in white (641 g/m²) and about 41 m² in colours (599 g/m²), roughly 390-417 m of 10 cm line.
How long does it take to dry?
30 minutes at 10 °C, 25 minutes at 25 °C and 5 minutes at 45 °C. Until then, protect the marking from traffic.
Can it be applied by hand?
Yes. As well as airless or air-assisted machines, the ATP 1K paints can be applied on small areas with a handgun, brush or roller.
Does it need thinning?
Usually not. If needed, thin it by 3% at most with solvent-based thinner.
How long does the paint keep?
18 months from manufacture, in the original sealed pail, at 5-30 °C, away from heat, frost and damp.
In road safety since 1998
Atto Trafic supplies complete road signage and safety equipment — signs, traffic signs, markings, parking barriers, speed bumps, mirrors, bollards and accessories.
- Durable products, compliant with STAS and SR EN
- ISO 9001 / 14001 / 27001 / 20671 certified
- Constant stock, delivery within 24-48 hours
- Support for municipalities, contractors, private car parks
