| Type | One-component solvent-based acrylic paint |
|---|---|
| Colour | Black (RAL 9017) |
| Weight | 25 kg |
| Binder | Pure acrylic resin |
| Pigment | UV-resistant pigments |
| Finish | Matt |
| Density | 1.40-1.60 kg/l |
| Solids by weight | 74% ± 3% |
| Solids by volume | 56% ± 3% |
| Viscosity | 90-100 KU at 25 °C |
| VOC content | 23-29% |
| Theoretical coverage | 599 g/m² at 400 µm wet film (225 µm dry); 901 g/m² at 600 µm (340 µm dry) |
| Per metre of line | 59.9 g/m at 10 cm width, 90.1 g/m at 15 cm (400 µm wet film) |
| Drying time | 30 min at 10 °C; 25 min at 25 °C; 5 min at 45 °C (ISO 9117) |
| Hiding power | HP4, ≥ 95% at 300 µm (EN 1871) |
| UV ageing | UV1, β ≤ 0.05 (EN 1871) |
| Compliance | BS EN 1871, SANS 731-1 |
| Application | Airless or air-assisted machines; by hand on small areas: handgun, brush or roller |
| Thinning | Maximum 3%, with solvent-based thinner |
| Application conditions | Surface 5-45 °C, air ≥ 5 °C, humidity ≤ 80%, temperature ≥ 5 °C above dew point |
| Substrate | Asphalt and concrete; prime concrete and very old or polished asphalt |
| Shelf life | 18 months in the original sealed pail, at 5-30 °C |
On pale concrete, a white line is hard to see, especially in sunshine. A black outline along its edges fixes that: the marking stands out again. The ATP 1K-9017 is the black acrylic paint for such outlines, for contrast areas in car parks and halls, and for markings in the colour of the asphalt.
599 g/m² at a 400 µm wet film. A 5 cm wide outline takes about 30 g per metre, so a 25 kg pail is enough for several hundred metres of outline.
Stir well with a mechanical stirrer and apply with an airless machine or by hand with a handgun, brush or roller. On concrete, prepare the surface and prime it first with the ATP PRIMER. Conditions: 5-45 °C at the surface, air at least 5 °C, humidity below 80%.
The white marking in the middle is painted with the ATP 1K-9016, the yellow one with the ATP 1K-1023.
For black outlines along white lines on pale concrete, where white is hard to see, for contrast areas in car parks and halls, and for markings in the colour of the asphalt.
A 5 cm wide outline takes about 30 g per metre at a 400 µm wet film, so a 25 kg pail is enough for several hundred metres of outline.
Yes. On concrete, prepare the surface and prime it first with the ATP PRIMER.
Stir it well with a mechanical stirrer, then apply it with an airless machine or by hand with a handgun, brush or roller. Thin by 3% at most with solvent-based thinner.
25 minutes at 25 °C; at 10 °C it takes 30 minutes, and at 45 °C, 5 minutes.
The white marking is painted with the ATP 1K-9016, the yellow one with the ATP 1K-1023.
Yes. You order directly on the site, as an individual or a company, and pay by card or cash on delivery.
Yes. Every order comes with a tax invoice, issued to an individual or a company.
Yes. Public institutions find us in SICAP as S.C. ATTO REGAL S.R.L. Our company details are on the Purchase through SEAP / SICAP page.
We deliver by courier within 24-48 hours.
Yes. As a private individual you can return the product within 14 days of receiving it, as the law provides, and you get your money back within 14 days of telling us. Return shipping is paid by the customer. The full terms are on the Return policy page.
Get a personalised offer, transport included.
Sending this form is not an order.
We will send you the offer, transport included, as soon as possible by email or phone.
Atto Trafic supplies complete road signage and safety equipment — signs, traffic signs, markings, parking barriers, speed bumps, mirrors, bollards and accessories.