| Type | Two-component cold plastic (MMA), solvent-free |
|---|---|
| Colour | White (RAL 9016) |
| Weight | 15 kg |
| Use | Cycle lanes and heavy-traffic road markings |
| Binder | Methacrylic resin |
| Pigment | Titanium dioxide |
| Glass beads | Premixed in the product |
| Density | 1.8 ± 0.10 kg/l |
| Viscosity | 110 ± 5 KU at 25 °C |
| Solid content | 99% ± 1% |
| Flash point | 21 °C |
| Theoretical coverage | 1.5-2 kg/m² |
| Curing at +5 °C | 2% catalyst; pot life 20 min; curing 55 min |
| Curing at +10 °C | 1% catalyst; pot life 12 min; curing 40 min |
| Curing at +20 °C | 1% catalyst; pot life 8 min; curing 30 min |
| Curing at +30 °C | 1% catalyst; pot life 6 min; curing 20 min |
| Thinning | Do not thin |
| Application | By hand, with a rubber roller, on an area marked out with tape |
| Application conditions | Surface between +5 and +30 °C; temperature ≥ 5 °C above dew point |
| UV ageing | UV1 |
| Retroreflection and skid resistance | Post-spray glass beads for immediate retroreflection and anti-skid material for skid resistance |
| Compatibility | Not applied over other paints, thermoplastic or marking tapes |
| New asphalt | Wait 4-6 weeks before applying |
| Tool cleaning | With road marking thinner; disposable rollers are recommended |
| Volatile organic compounds | Below 3% by weight (Swiss VOC ordinance) |
| Hazard classification | Danger: H225, H319, H315, H335, H317; professional product |
| Shelf life | 6 months in the original sealed container, at +5 to +30 °C |
On a cycle lane, white draws the bicycle symbol, the arrows and the edge lines, and these need to be seen at night too. The ATP 2K-9016 is a two-component cold plastic based on methacrylic resin (MMA), solvent-free. Unlike the other colours, it has glass beads premixed in the product, so the marking is easy to see by day and at night, even in rain. It also suits other heavy-traffic markings where ordinary paint wears off fast.
First stir the product with a mechanical stirrer, not with sticks or other tools, then add the catalyst and mix for at least one minute. The amount depends on the surface temperature: 2% at +5 °C, 1% between +10 and +30 °C. Too little catalyst, or catalyst that is poorly mixed, gives a marking that gets dirty easily and wears faster.
1.5-2 kg/m², so a 15 kg pail covers 7.5-10 m² of symbols and lines.
Tape off the outline of the symbol, pour the catalysed material and spread it evenly with a rubber roller, then remove the tape before it fully cures. Do not thin. The surface must be dry, clean and between +5 and +30 °C, and new asphalt should be left for 4-6 weeks. At +20 °C, the marking cures in about 30 minutes.
For immediate retroreflection, the manufacturer recommends also dropping ATP AC90 beads onto it, and for grip under braking, anti-skid material.
The white keeps for 6 months in the sealed pail at +5 to +30 °C, so it is best ordered close to the job. It is flammable, with a flash point of 21 °C, and contains under 3% volatile organic compounds. Work with gloves and safety glasses.
Green for the lane: the ATP 2K-6024 and ATP 2K-6024/10. Red: the ATP 2K-3020. A cheaper one-component option: the ATP 1K-9016.
On cycle lanes, for the bicycle symbol, arrows and edge lines, and for other heavy-traffic markings where ordinary paint wears off fast.
Yes, the white has glass beads premixed in the product, so the marking is easy to see by day and at night, even in rain. For immediate retroreflection, it is recommended to drop ATP AC90 beads onto it as well.
It depends on the surface temperature: 2% at +5 °C and 1% between +10 and +30 °C. Stir the product first with a mechanical stirrer, then for at least another minute after adding the catalyst.
At 1.5-2 kg/m², it covers 7.5-10 m² of symbols and lines.
Tape off the outline, pour the catalysed material and spread it evenly with a rubber roller, then remove the tape before it fully cures. Do not thin it; at +20 °C it cures in about 30 minutes.
The white keeps for 6 months in the original sealed container, at +5 to +30 °C.
Yes. You order directly on the site, as an individual or a company, and pay by card or cash on delivery.
Yes. Every order comes with a tax invoice, issued to an individual or a company.
Yes. Public institutions find us in SICAP as S.C. ATTO REGAL S.R.L. Our company details are on the Purchase through SEAP / SICAP page.
We deliver by courier within 24-48 hours.
Yes. As a private individual you can return the product within 14 days of receiving it, as the law provides, and you get your money back within 14 days of telling us. Return shipping is paid by the customer. The full terms are on the Return policy page.
Get a personalised offer, transport included.
Sending this form is not an order.
We will send you the offer, transport included, as soon as possible by email or phone.
Atto Trafic supplies complete road signage and safety equipment — signs, traffic signs, markings, parking barriers, speed bumps, mirrors, bollards and accessories.