| SR 1848-1 code | A6 |
|---|---|
| Name in the standard | Successive bend panels |
| Type | Warning road sign |
| Shape and colours | Red chevron on a white background |
| Size | 65 x 65 cm |
| Material | Galvanised steel sheet, 1 mm |
| Construction | Rounded corners, pressed edges, no sharp edges |
| Painting | Electrostatic, UV-resistant paint |
| Retroreflective sheeting | Class I (RA1), UV-resistant |
| Retroreflection (white, 0.2°/5°) | 70 cd/(lx·m²) |
| Sheeting service life | 7 years |
| Weight | 3.5 kg |
| Fixings included | 2 clamps, 4 bolts with nuts |
| Post diameter | Ø48 mm (Ø60 mm on request) |
| Standards | SR EN 12899-1:2007, SR 1848-1:2024, SR 1848-2:2011, SR 1848-3:2011 |
| Marking | CE |
| Width | 65 cm |
| Height | 65 cm |
A6 panels are set in a row on the outside of the bend and trace its line. At night the headlights pick them up one after another, so drivers see how the bend tightens before they reach it.
Class I (RA1) sheeting returns 70 cd/(lx·m²) for white to the driver and has a 7-year service life, enough on roads where headlights are the only light: local, minor and private roads or quiet streets. In areas with street lighting, shop windows, advertising and dense urban traffic, however, SR 1848-2 requires prismatic class 2 or 3 sheeting.
They go on the outside of bends signed with the A1 or A2, at least 3 panels. They are mandatory, again with a minimum of 3 panels, together with the A5 or L6. The chevron points in the direction of the turn. Annex A of SR 1848-2 gives the spacing: 6–10 m between panels on bends with a 30–50 m radius, 8–12 m at 50–80 m and 10–15 m at 80–100 m, with 4–5 panels for each direction, the first three of which must be visible from the straight, at least 25 m before the bend.
The bottom edge goes 1.50–2.50 m above the road and the inner edge 0.50–2.0 m from the road platform. Annex A of SR 1848-2 shows a complete example of how a bend is signed, with the A5, A6 and the warning signs before it. Fixings for the post are included: 2 clamps for Ø48 mm posts and 4 bolts with nuts. Clamps for Ø60 mm posts are available on request.
The post is ordered separately. For a fixed installation in a concrete foundation: the galvanised Ø48 mm post, 300 cm. For temporary use, with no foundation: the Ø48 mm tripod post, 120 cm. On concrete or paving, where you cannot dig: the Ø60 mm flange post, 300 cm, bolted down; for it, ask for the Ø60 mm clamps when you order.
They go on the outside of bends signed with the A1 or A2, at least 3 panels. They are mandatory, again with a minimum of 3 panels, together with the A5 or L6. The chevron points in the direction of the turn. Annex A of SR 1848-2 gives the spacing: 6–10 m between panels on bends with a 30–50 m radius, 8–12 m at 50–80 m and 10–15 m at 80–100 m, with 4–5 panels for each direction, the first three of which must be visible from the straight, at least 25 m before the bend.
The bottom edge goes 1.50–2.50 m above the road or kerb, and the inner edge 0.50–2.0 m from the road platform. The pack holds 2 clamps for Ø48 mm posts and 4 bolts with nuts; clamps for Ø60 mm posts are available on request.
The sheeting is class I (RA1), with a 7-year service life. Under SR 1848-2, during that time retroreflection stays at no less than 80% of the initial minimum value and the sheeting stays bonded over at least 95% of the surface.
At least 3, on the outside of the bend. Annex A of SR 1848-2 recommends 4–5 panels for each direction, 6–15 m apart, depending on the radius of the bend.
Where the sign does not compete with other lights: on roads and streets without strong lighting, on local, minor or private roads. In areas with many light sources (street lighting, shop windows, advertising), SR 1848-2 requires prismatic class 2 or 3 sheeting.
The post is ordered separately. For a fixed installation in a concrete foundation: the galvanised Ø48 mm post, 300 cm. For temporary use, with no foundation: the Ø48 mm tripod post, 120 cm. On concrete or paving, where you cannot dig: the Ø60 mm flange post, 300 cm, bolted down, for which you ask for the Ø60 mm clamps when you order.
Yes. It is CE marked and complies with SR EN 12899-1:2007, the European standard for vertical road signs, and with SR 1848-1:2024, SR 1848-2:2011 and SR 1848-3:2011. The sheeting and the paint resist UV and weathering.
Yes. You order directly on the site, as an individual or a company, and pay by card or cash on delivery.
Yes. Every order comes with a tax invoice, issued to an individual or a company.
Yes. Public institutions find us in SICAP as S.C. ATTO REGAL S.R.L. Our company details are on the Purchase through SEAP / SICAP page.
We deliver by courier within 24-48 hours.
Yes. As a private individual you can return the product within 14 days of receiving it, as the law provides, and you get your money back within 14 days of telling us. Return shipping is paid by the customer. The full terms are on the Return policy page.
Get a personalised offer, transport included.
Sending this form is not an order.
We will send you the offer, transport included, as soon as possible by email or phone.
Atto Trafic supplies complete road signage and safety equipment — signs, traffic signs, markings, parking barriers, speed bumps, mirrors, bollards and accessories.