| Type | Adhesive floor marking tape |
|---|---|
| Material | PVC, abrasion-resistant backing |
| Width | 5 cm |
| Length | 30 m |
| Color | Red and white, diagonal stripes |
| Use | Temporary obstacles and dangerous spots (ASR A1.3) |
| Application | On a clean, dry floor free of dust or oil; press it down firmly, especially at the ends; tears by hand |
| Duration | For temporary markings |
| Weight | 0.3 kg |
| Height | 5 cm |
Under ASR A1.3, red-white marks temporary obstacles and dangerous spots; the rule gives an open excavation as an example. On a hall floor, the ATO 8200-RW frames an area where work is going on, a channel left open during a repair or an obstacle that stays only a few days.
The stripes are diagonal. ASR A1.3 asks for them at about 45° and equally wide, over the whole size of the obstacle. For permanent hazards, the same rule recommends yellow-black.
A 1 x 1.5 m rectangle around a work area takes 5 m of tape, so one 30 m roll covers 6 such areas.
The floor must be clean, dry and free of dust or oil. Mark the line with chalk, lay the tape as you unroll it and press it down well, especially at the ends. It tears by hand and the PVC backing resists abrasion; the tape is meant for temporary markings.
Wider, at 10 cm, is the ATO 8250-RW. For permanent hazards there is the yellow-black ATO 8200-YBK, and for a marking that also shows at night, the red-white reflective ATZ R01.
Under ASR A1.3, red-white marks temporary obstacles and dangerous spots; the rule gives an open excavation as an example. On a hall floor, the ATO 8200-RW frames an area where work is going on, a channel left open during a repair or an obstacle that stays only a few days.
A 1 x 1.5 m rectangle around a work area takes 5 m of tape, so one 30 m roll covers 6 such areas.
The floor must be clean, dry and free of dust or oil. Mark the line with chalk, lay the tape as you unroll it and press it down well, especially at the ends. It tears by hand and the PVC backing resists abrasion; the tape is meant for temporary markings.
No. The PVC backing resists abrasion, but the tape is meant for temporary markings. For permanent markings, the floor is painted.
The stripes are diagonal. ASR A1.3 asks for them at about 45° and equally wide, over the whole size of the obstacle. For permanent hazards, the same rule recommends yellow-black.
Wider, at 10 cm, is the ATO 8250-RW. For permanent hazards there is the yellow-black ATO 8200-YBK, and for a marking that also shows at night, the red-white reflective ATZ R01.
Yes. You order directly on the site, as an individual or a company, and pay by card or cash on delivery.
Yes. Every order comes with a tax invoice, issued to an individual or a company.
Yes. Public institutions find us in SICAP as S.C. ATTO REGAL S.R.L. Our company details are on the Purchase through SEAP / SICAP page.
We deliver by courier within 24-48 hours.
Yes. As a private individual you can return the product within 14 days of receiving it, as the law provides, and you get your money back within 14 days of telling us. Return shipping is paid by the customer. The full terms are on the Return policy page.
Get a personalised offer, transport included.
Sending this form is not an order.
We will send you the offer, transport included, as soon as possible by email or phone.
Atto Trafic supplies complete road signage and safety equipment — signs, traffic signs, markings, parking barriers, speed bumps, mirrors, bollards and accessories.