| SR 1848-1 code | L7 |
|---|---|
| Name in the standard | Successive chevron panels for bends |
| Type | Panel for signing special situations |
| Shape and colours | White square with a red chevron and a fluorescent yellow-green border |
| Fluorescent yellow-green border | 10 cm |
| Size | 85x85 cm |
| Border width | 10 cm |
| Material | Galvanised steel sheet, 1 mm |
| Construction | Rounded corners, pressed edges, no sharp edges |
| Painting | Electrostatic, UV-resistant paint |
| Face sheeting | Class II (RA2), prismatic |
| Border sheeting | Fluorescent yellow-green, class 3 |
| Sheeting service life | 10 years (SR 1848-2) |
| Fixings included | 2 clamps, 4 bolts with nuts |
| Post diameter | Ø48 mm (Ø60 mm on request) |
| Standards | SR EN 12899-1:2007, SR 1848-1:2024, SR 1848-2:2011, SR 1848-3:2011 |
| Marking | CE |
| Weight | 6.5 kg |
| Length | 85 cm |
| Height | 85 cm |
The L7 leads the driver's eye along the bend: a large red chevron on a white background inside a fluorescent yellow-green border. Several are installed one after another on the outside of the bend. The face is in class II prismatic sheeting and the border in fluorescent yellow-green class 3 sheeting, as on all L panels.
The panel combines two sheetings: the face is class II (RA2) prismatic sheeting, which returns roughly three to four times more light to the driver than class I sheeting, and the 10 cm border is fluorescent yellow-green class 3 sheeting, the colour SR 1848-1:2024 requires for special situations. Fluorescent sheeting stands out in daylight too, in dull weather or at dusk, not only in headlights. SR 1848-2 guarantees a 10-year service life for classes 2 and 3.
It goes on the outside of bends as defined for the A1 (left bend) and A2 (right bend), at least 3 panels, and must be used with the A5 and L6 (particularly dangerous bend). The chevron tip shows the direction of the bend, and placement follows annex A of SR 1848-2. The standard calls for care: L panels are used only where the danger is particular, because using them too often makes them commonplace, and too many intense reflective surfaces tire drivers at night.
Group L panels sign places of particular danger. SR 1848-1:2024 requires a fluorescent yellow-green class 3 retroreflective background for them, so they stand out clearly from ordinary signs.
Fixings for the post are included: 2 clamps for Ø48 mm posts and 4 bolts with nuts; clamps for Ø60 mm posts are available on request. The bottom edge of the panel goes 1.50–2.50 m above the road or kerb, and the edge nearest the road 0.50–2.0 m from the road platform.
The post is ordered separately. For a fixed installation in a concrete foundation: the galvanised Ø48 mm post, 300 cm. For temporary use, with no foundation: the Ø48 mm tripod post, 120 cm. On concrete or paving, where you cannot dig: the Ø60 mm flange post, 300 cm, bolted down; for it, ask for the Ø60 mm clamps when you order.
The 85x85 cm size with a 10 cm border is the one SR 1848-2 sets for the L7 panels; the version with a class I face is the L7.
It goes on the outside of bends as defined for the A1 (left bend) and A2 (right bend), at least 3 panels, and must be used with the A5 and L6 (particularly dangerous bend). The chevron tip shows the direction of the bend, and placement follows annex A of SR 1848-2. The standard calls for care: L panels are used only where the danger is particular, because using them too often makes them commonplace, and too many intense reflective surfaces tire drivers at night.
The pack holds 2 clamps for Ø48 mm posts and 4 bolts with nuts. Clamps for Ø60 mm posts are available on request.
SR 1848-1:2024 requires particularly dangerous places to be signed with panels with a fluorescent yellow-green class 3 retroreflective background, which is far easier to see by day, at dusk and at night than an ordinary sign.
At least 3, on the outside of the bend. They must be used with the A5 and L6.
Yes. It is CE marked and complies with SR EN 12899-1:2007, the European standard for vertical road signs, and with SR 1848-1:2024, SR 1848-2:2011 and SR 1848-3:2011. The sheeting and the paint resist UV and weathering.
Yes. You order directly on the site, as an individual or a company, and pay by card or cash on delivery.
Yes. Every order comes with a tax invoice, issued to an individual or a company.
Yes. Public institutions find us in SICAP as S.C. ATTO REGAL S.R.L. Our company details are on the Purchase through SEAP / SICAP page.
We deliver by courier within 24-48 hours.
Yes. As a private individual you can return the product within 14 days of receiving it, as the law provides, and you get your money back within 14 days of telling us. Return shipping is paid by the customer. The full terms are on the Return policy page.
Get a personalised offer, transport included.
Sending this form is not an order.
We will send you the offer, transport included, as soon as possible by email or phone.
Atto Trafic supplies complete road signage and safety equipment — signs, traffic signs, markings, parking barriers, speed bumps, mirrors, bollards and accessories.