| SR 1848-1 code | U26 |
|---|---|
| Name in the standard | End of temporary contraflow |
| Type | Temporary road sign |
| Shape and colours | 80x120 cm yellow panel with the lane returning to the right, onto its own carriageway |
| Size | 80x120 cm |
| Material | Galvanised steel sheet, 1 mm |
| Construction | Rounded corners, pressed edges, no sharp edges |
| Painting | Electrostatic, UV-resistant paint |
| Retroreflective sheeting | Class II (RA2), prismatic, UV-resistant |
| Retroreflection (white, 0.2°/5°) | 250 cd/(lx·m²) |
| Sheeting service life | 10 years (SR 1848-2) |
| Fixings included | 2 clamps, 4 bolts with nuts |
| Post diameter | Ø48 mm (Ø60 mm on request) |
| Standards | SR EN 12899-1:2007, SR 1848-1:2024, SR 1848-2:2011, SR 1848-3:2011 |
| Marking | CE |
| Weight | 10 kg |
| Length | 80 cm |
| Height | 120 cm |
The 80x120 cm yellow panel that ends the contraflow and shows the lane returning to its own carriageway, with class II prismatic sheeting.
Class II (RA2) prismatic sheeting shows up three to four times better at night than class I sheeting, even among plant lights and street lights. For temporary signing, SR 1848-2 adds a clear rule: a temporary sign must have at least the retroreflection class of the permanent signs on the section, so on roads already signed in class II it is the compliant choice.
It goes at the end of the temporary contraflow, to show traffic returning to its normal carriageway. SR 1848-1:2024 sets no specific distance for this sign: it is installed under the technical regulations in force for signing roadworks, following the signing layout of the works. Like any sign, it normally goes on the right-hand side of the direction of travel, so that it can be seen from at least 50 m in built-up areas and at least 100 m outside them (SR 1848-2).
The sign belongs to the end-of-restriction signing: it goes after the end of the section occupied by the works, last in the installation order (after the advance signing and the signing that marks the works), also with at least 50 cm of clear space outside the carriageway.
On public roads, works are signed under the methodological rules approved by Order MI/MT no. 1112/411/2000. The road closure or traffic restriction is approved by the road authority, with the traffic police's agreement, on the basis of a signing layout endorsed as final, a copy of which the contractor keeps at the work site. The contractor installs, completes and maintains the signing for the whole job, removes it at the end and restores the original signing; accidents caused by incomplete or missing temporary signing are entirely the contractor's responsibility.
At night, if the existing signing on the road is retroreflective, the temporary signing must be retroreflective too and can be supplemented with flashing or sequential (“cascade”) amber lamps; on main and connecting streets in towns, retroreflective temporary signs are supplemented with flashing amber lamps.
Fixings for the post are included: 2 clamps for Ø48 mm posts and 4 bolts with nuts; clamps for Ø60 mm posts are available on request. The bottom edge of the sign goes 1.50–2.50 m above the road or kerb, and the edge nearest the road 0.50–2.0 m from the road platform.
The 80x120 cm size is the one SR 1848-2 sets for national roads; motorways call for 120x180 cm, and other roads and streets for 65x85 cm. The class I sheeting version, 65x85 cm, is the U26d.
It goes at the end of the temporary contraflow, to show traffic returning to its normal carriageway. SR 1848-1:2024 sets no specific distance for this sign: it is installed under the technical regulations in force for signing roadworks, following the signing layout of the works. Like any sign, it normally goes on the right-hand side of the direction of travel, so that it can be seen from at least 50 m in built-up areas and at least 100 m outside them (SR 1848-2).
First the advance signing (which this sign belongs to), then the signing that marks the works (barrier boards, markers, cones) and finally the end-of-restriction signing. Signs are first stood on the ground to check visibility, then fixed to a support, with at least 50 cm of clear space outside the carriageway.
It is larger than the U26d: 80x120 cm instead of 65x85 cm, and the class II (RA2) prismatic sheeting returns three to four times more light, with a guaranteed 10-year service life instead of 7.
SR 1848-2 requires temporary signs to have at least the retroreflection class of the permanent signing on that section. If the existing signs are class II, the temporary ones must be at least class II too. In areas with many light sources (street lighting, shop windows, advertising), the standard requires prismatic class 2 or 3 sheeting anyway.
The pack holds 2 clamps for Ø48 mm posts and 4 bolts with nuts. Clamps for Ø60 mm posts are available on request.
The contractor. Under Order MI/MT no. 1112/411/2000, the contractor installs the signing to the layout approved by the road authority with the traffic police's agreement, keeps a copy of the approval and the layout at the work site, maintains and completes the signing for the whole job and removes it at the end. Accidents caused by incomplete or missing temporary signing are entirely the contractor's responsibility.
Last, after the advance signing and the signing that marks the works, just after the end of the section occupied by the works, with at least 50 cm of clear space outside the carriageway. When the works finish, all the temporary signing is removed and the original signing is restored.
Yes. You order directly on the site, as an individual or a company, and pay by card or cash on delivery.
Yes. Every order comes with a tax invoice, issued to an individual or a company.
Yes. Public institutions find us in SICAP as S.C. ATTO REGAL S.R.L. Our company details are on the Purchase through SEAP / SICAP page.
We deliver by courier within 24-48 hours.
Yes. As a private individual you can return the product within 14 days of receiving it, as the law provides, and you get your money back within 14 days of telling us. Return shipping is paid by the customer. The full terms are on the Return policy page.
Get a personalised offer, transport included.
Sending this form is not an order.
We will send you the offer, transport included, as soon as possible by email or phone.
Atto Trafic supplies complete road signage and safety equipment — signs, traffic signs, markings, parking barriers, speed bumps, mirrors, bollards and accessories.