| SR 1848-1 code | C11 |
|---|---|
| Name in the standard | No animal-drawn vehicles |
| Type | Prohibition or restriction road sign |
| Shape and colours | White disc with a red border and the black outline of a horse-drawn cart |
| Size | Ø80 cm |
| Format (SR 1848-2) | Large |
| Material | Galvanised steel sheet, 1 mm |
| Construction | Pressed edges, no sharp edges |
| Painting | Electrostatic, UV-resistant paint |
| Retroreflective sheeting | Class II (RA2), prismatic, UV-resistant |
| Retroreflection (white, 0.2°/5°) | 250 cd/(lx·m²) |
| Sheeting service life | 10 years (SR 1848-2) |
| Fixings included | 2 clamps, 4 bolts with nuts |
| Post diameter | Ø48 mm (Ø60 mm on request) |
| Standards | SR EN 12899-1:2007, SR 1848-1:2024, SR 1848-2:2011, SR 1848-3:2011 |
| Marking | CE |
| Weight | 5.5 kg |
| Height | 80 cm |
The C11 bans carts and other vehicles drawn by animals, for example on fast roads or in town centres. The symbol shows a horse pulling a cart. This version is Ø80 cm, the large format required on national roads, with class II prismatic sheeting that can be seen from far away at night.
Class II (RA2) prismatic sheeting returns roughly three to four times more headlight to the driver than class I sheeting, so the sign can be seen from further away at night and stays legible when viewed at an angle. SR 1848-2 requires prismatic class 2 or 3 sheeting in areas with many light sources, such as streets with public lighting, shop windows and advertising, where a class I sign gets lost in the background. Class II sheeting has a guaranteed 10-year service life, against 7 years for class I.
It goes at the start of a section closed to animal-drawn vehicles.
As a general rule for prohibition and restriction signs, it goes right after the junction before the restricted section, so the drivers concerned can take another route without having to turn back. The sign is repeated after every junction on the section, for drivers joining from side roads, and if the restriction starts further on, the P4 additional panel with the distance goes under it.
Fixings for the post are included: 2 clamps for Ø48 mm posts and 4 bolts with nuts; clamps for Ø60 mm posts are available on request. The bottom edge of the sign goes 1.50–2.50 m above the road or kerb, and the edge nearest the road 0.50–2.0 m from the road platform.
The post is ordered separately. For a fixed installation in a concrete foundation: the galvanised Ø48 mm post, 300 cm. For temporary use, with no foundation: the Ø48 mm tripod post, 120 cm. On concrete or paving, where you cannot dig: the Ø60 mm flange post, 300 cm, bolted down; for it, ask for the Ø60 mm clamps when you order.
The 80 cm diameter is the large format in SR 1848-2, required on national roads; motorways use the very large 100 cm format. County and local roads, streets and private roads open to public traffic only need the normal Ø60 cm format: the class I sheeting version is the C11.
It goes at the start of a section closed to animal-drawn vehicles.
It is larger than the C11: Ø80 cm instead of Ø60 cm, and the class II (RA2) prismatic sheeting returns three to four times more light, with a guaranteed 10-year service life instead of 7.
No. SR 1848-2 forbids using signs smaller than the format set for the road's category. National roads require the large Ø80 cm format, and motorways the very large Ø100 cm format.
SR 1848-2 requires prismatic class 2 or 3 sheeting in areas with many light sources: street lighting, shop windows, advertising, dense urban areas. Elsewhere, class II is chosen for better visibility on fast roads and where the sign is seen at an angle.
The pack holds 2 clamps for Ø48 mm posts and 4 bolts with nuts. Clamps for Ø60 mm posts are available on request, a better fit for large signs or windy locations.
The post is ordered separately. For a fixed installation in a concrete foundation: the galvanised Ø48 mm post, 300 cm. For temporary use, with no foundation: the Ø48 mm tripod post, 120 cm. On concrete or paving, where you cannot dig: the Ø60 mm flange post, 300 cm, bolted down, for which you ask for the Ø60 mm clamps when you order.
The C15, no motor vehicles or animal-drawn vehicles. The C11 covers animal-drawn vehicles only.
The P34 (except residents) or P18 (exempting certain vehicle categories) additional panel goes under the sign, adapted to the exempted category.
Yes. SR 1848-1:2024 requires prohibition and restriction signs to be repeated after every junction on the restricted section, so that they also apply to drivers joining from side roads.
Yes. It is CE marked and complies with SR EN 12899-1:2007, the European standard for vertical road signs, and with SR 1848-1:2024, SR 1848-2:2011 and SR 1848-3:2011. The sheeting and the paint resist UV and weathering.
Yes. You order directly on the site, as an individual or a company, and pay by card or cash on delivery.
Yes. Every order comes with a tax invoice, issued to an individual or a company.
Yes. Public institutions find us in SICAP as S.C. ATTO REGAL S.R.L. Our company details are on the Purchase through SEAP / SICAP page.
We deliver by courier within 24-48 hours.
Yes. As a private individual you can return the product within 14 days of receiving it, as the law provides, and you get your money back within 14 days of telling us. Return shipping is paid by the customer. The full terms are on the Return policy page.
Get a personalised offer, transport included.
Sending this form is not an order.
We will send you the offer, transport included, as soon as possible by email or phone.
Atto Trafic supplies complete road signage and safety equipment — signs, traffic signs, markings, parking barriers, speed bumps, mirrors, bollards and accessories.