| SR 1848-1 code | B5 |
|---|---|
| Name in the standard | Priority for oncoming traffic |
| Type | Priority road sign |
| Shape and colours | Disc with red border, white background, black arrow down and red arrow up |
| Size | 60 cm diameter |
| Format (SR 1848-2) | Normal |
| Red border | 60 mm |
| Material | Galvanised steel sheet, 1 mm |
| Construction | Rounded corners, pressed edges, no sharp edges |
| Painting | Electrostatic, UV-resistant paint |
| Retroreflective sheeting | Class I (RA1), UV-resistant |
| Retroreflection (white, 0.2°/5°) | 70 cd/(lx·m²) |
| Sheeting service life | 7 years |
| Weight | 3 kg |
| Fixings included | 2 clamps, 4 bolts with nuts |
| Post diameter | Ø48 mm (Ø60 mm on request) |
| Standards | SR EN 12899-1:2007, SR 1848-1:2024, SR 1848-2:2011, SR 1848-3:2011 |
| Marking | CE |
| Height | 60 cm |
The B5 goes at the end of a narrow section where two vehicles cannot pass side by side, such as a narrow bridge. The red arrow shows the direction that must wait until oncoming traffic has passed.
The sign has class I (RA1) retroreflective sheeting: 70 cd/(lx·m²) for white and a 7-year service life. It is the economical choice for places without many light sources, such as local, minor and private roads or streets without strong lighting. Where there is street lighting, shop windows or advertising, SR 1848-2 requires prismatic class 2 or 3 sheeting, which stands out better against a lit background.
It goes 10–20 m before a section whose carriageway is narrower than 5.50 m, to require drivers travelling in the direction of the red arrow to give priority to oncoming vehicles on the narrow section. It is preceded by the A9 (road narrows on both sides), A10 (road narrows on the right) or A11 (road narrows on the left). If the narrowing only stops certain categories of vehicles from passing, the P14 additional panel with the silhouettes of the vehicles that must give way goes under the sign.
Fixings for the post are included: 2 clamps for Ø48 mm posts and 4 bolts with nuts; clamps for Ø60 mm posts are available on request. The bottom edge of the sign goes 1.50–2.50 m above the road or kerb, and the edge nearest the road 0.50–2.0 m from the road platform. When they share a post, priority signs go above mandatory signs.
The post is ordered separately. For a fixed installation in a concrete foundation: the galvanised Ø48 mm post, 300 cm. For temporary use, with no foundation: the Ø48 mm tripod post, 120 cm. On concrete or paving, where you cannot dig: the Ø60 mm flange post, 300 cm, bolted down; for it, ask for the Ø60 mm clamps when you order.
The 60 cm diameter is the normal format in SR 1848-2, for county and local roads, streets and private roads open to public traffic. National roads call for the large 80 cm format, available with class II sheeting: the B5_II. The B6 goes at the other end of the narrow section.
It goes 10–20 m before a section whose carriageway is narrower than 5.50 m, to require drivers travelling in the direction of the red arrow to give priority to oncoming vehicles on the narrow section. It is preceded by the A9 (road narrows on both sides), A10 (road narrows on the right) or A11 (road narrows on the left). If the narrowing only stops certain categories of vehicles from passing, the P14 additional panel with the silhouettes of the vehicles that must give way goes under the sign.
The large 80 cm diameter format, available with class II sheeting: the B5_II. The 60 cm diameter is the normal format, for county and local roads and streets.
The bottom edge goes 1.50–2.50 m above the road or kerb, and the inner edge 0.50–2.0 m from the road platform. The pack holds 2 clamps for Ø48 mm posts and 4 bolts with nuts; clamps for Ø60 mm posts are available on request.
The sheeting is class I (RA1), with a 7-year service life. Under SR 1848-2, during that time retroreflection stays at no less than 80% of the initial minimum value and the sheeting stays bonded over at least 95% of the surface.
Where the sign does not compete with other lights: on roads and streets without strong lighting, on local, minor or private roads. In areas with many light sources (street lighting, shop windows, advertising), SR 1848-2 requires prismatic class 2 or 3 sheeting.
Yes: the B5_II (Ø80 cm), with prismatic class II (RA2) sheeting, which returns about three to four times more light from the headlights and has a 10-year service life, against 7 years for class I.
Yes. It is CE marked and complies with SR EN 12899-1:2007, the European standard for vertical road signs, and with SR 1848-1:2024, SR 1848-2:2011 and SR 1848-3:2011. The sheeting and the paint resist UV and weathering.
Yes. You order directly on the site, as an individual or a company, and pay by card or cash on delivery.
Yes. Every order comes with a tax invoice, issued to an individual or a company.
Yes. Public institutions find us in SICAP as S.C. ATTO REGAL S.R.L. Our company details are on the Purchase through SEAP / SICAP page.
We deliver by courier within 24-48 hours.
Yes. As a private individual you can return the product within 14 days of receiving it, as the law provides, and you get your money back within 14 days of telling us. Return shipping is paid by the customer. The full terms are on the Return policy page.
Get a personalised offer, transport included.
Sending this form is not an order.
We will send you the offer, transport included, as soon as possible by email or phone.
Atto Trafic supplies complete road signage and safety equipment — signs, traffic signs, markings, parking barriers, speed bumps, mirrors, bollards and accessories.