| SR 1848-1 code | D3 |
|---|---|
| Name in the standard | Turn right |
| Type | Mandatory road sign |
| Shape and colours | Blue disc with a white arrow curving to the right |
| Size | 40 cm diameter |
| Format (SR 1848-2) | Small |
| Material | Galvanised steel sheet, 1 mm |
| Construction | Pressed edges, no sharp edges |
| Painting | Electrostatic, UV-resistant paint |
| Retroreflective sheeting | Class I (RA1), UV-resistant |
| Retroreflection (white, 0.2°/5°) | 70 cd/(lx·m²) |
| Sheeting service life | 7 years |
| Weight | 2 kg |
| Fixings included | 2 clamps, with bolts and nuts |
| Post diameter | Ø48 mm (Ø60 mm on request) |
| Standards | SR EN 12899-1:2007, SR 1848-1:2024, SR 1848-2:2011, SR 1848-3:2011 |
| Marking | CE |
| Height | 40 cm |
The D3 tells drivers, before the junction, that they must turn right: the white arrow curves to the right, and the turn is made after passing the sign. This version is Ø40 cm, the small format in SR 1848-2, intended for low-traffic minor roads.
Class I (RA1) sheeting returns 70 cd/(lx·m²) for white to the driver and has a 7-year service life, enough on roads where headlights are the only light: local, minor and private roads or quiet streets. In areas with street lighting, shop windows, advertising and dense urban traffic, however, SR 1848-2 requires prismatic class 2 or 3 sheeting. The class II version is the D3a_II (Ø80 cm).
It goes before the entrance to the junction where turning in the direction of the arrow is compulsory; the turn is made after passing the sign. The arrow can point right or left as needed.
For all mandatory signs, SR 1848-1:2024 provides that their meaning applies in the immediate vicinity of the place where they are installed, before or after it.
Fixings for the post are included: 2 clamps for Ø48 mm posts, with bolts and nuts; clamps for Ø60 mm posts are available on request. The bottom edge of the sign goes 1.50–2.50 m above the road or kerb, and the edge nearest the road 0.50–2.0 m from the road platform. The sign must be visible from at least 50 m in built-up areas and 100 m outside them.
The post is ordered separately. For a fixed installation in a concrete foundation: the galvanised Ø48 mm post, 300 cm. For temporary use, with no foundation: the Ø48 mm tripod post, 120 cm. On concrete or paving, where you cannot dig: the Ø60 mm flange post, 300 cm, bolted down; for it, ask for the Ø60 mm clamps when you order.
The 40 cm diameter is the small format in SR 1848-2, meant for low-traffic minor roads and for short-term police signing at accident scenes. County and local roads, streets and private roads open to public traffic call for the normal Ø60 cm format: the D3a. In car parks and private premises closed to public traffic the standard is not mandatory, so the small format is enough there.
It goes before the entrance to the junction where turning in the direction of the arrow is compulsory; the turn is made after passing the sign. The arrow can point right or left as needed.
On low-traffic minor roads, for short-term police signing and in car parks or private premises closed to public traffic, where the standard is not mandatory. County and local roads and streets call for the normal Ø60 cm format: the D3a.
The bottom edge goes 1.50–2.50 m above the road or kerb, and the inner edge 0.50–2.0 m from the road platform. The pack holds 2 clamps for Ø48 mm posts, with bolts and nuts; clamps for Ø60 mm posts are available on request.
Where the sign does not compete with other lights: on roads and streets without strong lighting, on local, minor or private roads. In areas with many light sources (street lighting, shop windows, advertising), SR 1848-2 requires prismatic class 2 or 3 sheeting.
Yes: the D3a_II (Ø80 cm), with prismatic class II (RA2) sheeting, which returns about three to four times more light from the headlights and has a 10-year service life, against 7 years for class I.
The sheeting is class I (RA1), with a 7-year service life. Under SR 1848-2, during that time retroreflection stays at no less than 80% of the initial minimum value and the sheeting stays bonded over at least 95% of the surface.
The D3 stands before the junction and you turn after passing it. The D2 stands on the far side of the junction and you turn before reaching it.
Yes. It is CE marked and complies with SR EN 12899-1:2007, the European standard for vertical road signs, and with SR 1848-1:2024, SR 1848-2:2011 and SR 1848-3:2011. The sheeting and the paint resist UV and weathering.
Yes. You order directly on the site, as an individual or a company, and pay by card or cash on delivery.
Yes. Every order comes with a tax invoice, issued to an individual or a company.
Yes. Public institutions find us in SICAP as S.C. ATTO REGAL S.R.L. Our company details are on the Purchase through SEAP / SICAP page.
We deliver by courier within 24-48 hours.
Yes. As a private individual you can return the product within 14 days of receiving it, as the law provides, and you get your money back within 14 days of telling us. Return shipping is paid by the customer. The full terms are on the Return policy page.
Get a personalised offer, transport included.
Sending this form is not an order.
We will send you the offer, transport included, as soon as possible by email or phone.
Atto Trafic supplies complete road signage and safety equipment — signs, traffic signs, markings, parking barriers, speed bumps, mirrors, bollards and accessories.