| SR 1848-1 code | D5 |
|---|---|
| Name in the standard | Pass on this side |
| Type | Mandatory road sign |
| Shape and colours | Blue disc with a white arrow pointing down to the left |
| Size | 40 cm diameter |
| Format (SR 1848-2) | Small |
| Material | Galvanised steel sheet, 1 mm |
| Construction | Pressed edges, no sharp edges |
| Painting | Electrostatic, UV-resistant paint |
| Retroreflective sheeting | Class I (RA1), UV-resistant |
| Retroreflection (white, 0.2°/5°) | 70 cd/(lx·m²) |
| Sheeting service life | 7 years |
| Weight | 2 kg |
| Fixings included | 2 clamps, with bolts and nuts |
| Post diameter | Ø48 mm (Ø60 mm on request) |
| Standards | SR EN 12899-1:2007, SR 1848-1:2024, SR 1848-2:2011, SR 1848-3:2011 |
| Marking | CE |
| Height | 40 cm |
The D5 tells drivers which side to pass an obstacle on: the white arrow, pointing down at an angle, shows that they must keep to the left. It is seen at the ends of traffic islands and channelling islands. This version is Ø40 cm, the small format in SR 1848-2, intended for low-traffic minor roads.
Class I (RA1) sheeting returns 70 cd/(lx·m²) for white to the driver and has a 7-year service life, enough on roads where headlights are the only light: local, minor and private roads or quiet streets. In areas with street lighting, shop windows, advertising and dense urban traffic, however, SR 1848-2 requires prismatic class 2 or 3 sheeting. The class II version is the D5b_II (Ø80 cm).
It goes at the ends of traffic islands, channelling islands and central reserves, or before another obstacle on the road, where vehicles must pass it on the left. Where there is no room for a sign of ordinary size, for example at tram-stop islands or at the ends of a double safety barrier between carriageways, small signs can be used.
As a general rule for mandatory signs, the obligation applies in the immediate vicinity of the sign, before or after the place where it stands, as the case may be.
Fixings for the post are included: 2 clamps for Ø48 mm posts, with bolts and nuts; clamps for Ø60 mm posts are available on request. The bottom edge of the sign goes 1.50–2.50 m above the road or kerb, and the edge nearest the road 0.50–2.0 m from the road platform. The sign must be visible from at least 50 m in built-up areas and 100 m outside them.
The post is ordered separately. For a fixed installation in a concrete foundation: the galvanised Ø48 mm post, 300 cm. For temporary use, with no foundation: the Ø48 mm tripod post, 120 cm. On concrete or paving, where you cannot dig: the Ø60 mm flange post, 300 cm, bolted down; for it, ask for the Ø60 mm clamps when you order.
The 40 cm diameter is the small format in SR 1848-2, meant for low-traffic minor roads and for short-term police signing at accident scenes. County and local roads, streets and private roads open to public traffic call for the normal Ø60 cm format: the D5b. In car parks and private premises closed to public traffic the standard is not mandatory, so the small format is enough there.
It goes at the ends of traffic islands, channelling islands and central reserves, or before another obstacle on the road, where vehicles must pass it on the left. Where there is no room for a sign of ordinary size, for example at tram-stop islands or at the ends of a double safety barrier between carriageways, small signs can be used.
On low-traffic minor roads, for short-term police signing and in car parks or private premises closed to public traffic, where the standard is not mandatory. County and local roads and streets call for the normal Ø60 cm format: the D5b.
The bottom edge goes 1.50–2.50 m above the road or kerb, and the inner edge 0.50–2.0 m from the road platform. The pack holds 2 clamps for Ø48 mm posts, with bolts and nuts; clamps for Ø60 mm posts are available on request.
Where the sign does not compete with other lights: on roads and streets without strong lighting, on local, minor or private roads. In areas with many light sources (street lighting, shop windows, advertising), SR 1848-2 requires prismatic class 2 or 3 sheeting.
Yes: the D5b_II (Ø80 cm), with prismatic class II (RA2) sheeting, which returns about three to four times more light from the headlights and has a 10-year service life, against 7 years for class I.
The sheeting is class I (RA1), with a 7-year service life. Under SR 1848-2, during that time retroreflection stays at no less than 80% of the initial minimum value and the sheeting stays bonded over at least 95% of the surface.
Yes. SR 1848-1:2024 allows small signs where there is no room for one of ordinary size, for example at tram-stop islands or at the ends of a double safety barrier. This sign is Ø60 cm, the normal format.
Yes. It is CE marked and complies with SR EN 12899-1:2007, the European standard for vertical road signs, and with SR 1848-1:2024, SR 1848-2:2011 and SR 1848-3:2011. The sheeting and the paint resist UV and weathering.
Yes. You order directly on the site, as an individual or a company, and pay by card or cash on delivery.
Yes. Every order comes with a tax invoice, issued to an individual or a company.
Yes. Public institutions find us in SICAP as S.C. ATTO REGAL S.R.L. Our company details are on the Purchase through SEAP / SICAP page.
We deliver by courier within 24-48 hours.
Yes. As a private individual you can return the product within 14 days of receiving it, as the law provides, and you get your money back within 14 days of telling us. Return shipping is paid by the customer. The full terms are on the Return policy page.
Get a personalised offer, transport included.
Sending this form is not an order.
We will send you the offer, transport included, as soon as possible by email or phone.
Atto Trafic supplies complete road signage and safety equipment — signs, traffic signs, markings, parking barriers, speed bumps, mirrors, bollards and accessories.