| SR 1848-1 code | C1 |
|---|---|
| Name in the standard | No entry |
| Type | Prohibition or restriction road sign |
| Shape and colours | 80 cm diameter red disc with a white horizontal bar |
| Size | Ø80 cm |
| Format (SR 1848-2) | Large |
| Material | Galvanised steel sheet, 1 mm |
| Construction | Pressed edges, no sharp edges |
| Painting | Electrostatic, UV-resistant paint |
| Retroreflective sheeting | Class II (RA2), prismatic, UV-resistant |
| Retroreflection (white, 0.2°/5°) | 250 cd/(lx·m²) |
| Sheeting service life | 10 years (SR 1848-2) |
| Fixings included | 2 clamps, 4 bolts with nuts |
| Post diameter | Ø48 mm (Ø60 mm on request) |
| Standards | SR EN 12899-1:2007, SR 1848-1:2024, SR 1848-2:2011, SR 1848-3:2011 |
| Marking | CE |
| Weight | 5.5 kg |
| Height | 80 cm |
The red disc with a white horizontal bar, in the large Ø80 cm format with class II prismatic sheeting. It is the sign placed at the far end of one-way streets so that nobody drives in against the flow, and it can be seen from far away at night, even on a lit street.
Class II (RA2) prismatic sheeting returns roughly three to four times more headlight to the driver than class I sheeting, so the sign can be seen from further away at night and stays legible when viewed at an angle. SR 1848-2 requires prismatic class 2 or 3 sheeting in areas with many light sources, such as streets with public lighting, shop windows and advertising, where a class I sign gets lost in the background. Class II sheeting has a guaranteed 10-year service life, against 7 years for class I.
It goes at the start of a road section that no vehicle may enter, while traffic from the opposite direction is still allowed, and at the far end of a one-way road. Depending on the case, the P18 (vehicle categories exempted from the sign), P33 (road closed to public traffic), P34 (except residents) or P35 (except authorised vehicles) additional panels can go under it.
As a general rule, prohibition and restriction signs go just after the junction before the restricted section, so that drivers can choose another route without having to turn back. Along the section, the sign is repeated after every junction, so the prohibition also applies to traffic joining from side roads. If the prohibition starts some distance after the sign, the P4 additional panel with the distance goes under it.
Fixings for the post are included: 2 clamps for Ø48 mm posts and 4 bolts with nuts; clamps for Ø60 mm posts are available on request. The bottom edge of the sign goes 1.50–2.50 m above the road or kerb, and the edge nearest the road 0.50–2.0 m from the road platform.
The post is ordered separately. For a fixed installation in a concrete foundation: the galvanised Ø48 mm post, 300 cm. For temporary use, with no foundation: the Ø48 mm tripod post, 120 cm. On concrete or paving, where you cannot dig: the Ø60 mm flange post, 300 cm, bolted down; for it, ask for the Ø60 mm clamps when you order.
The 80 cm diameter is the large format in SR 1848-2, required on national roads; motorways use the very large 100 cm format. County and local roads, streets and private roads open to public traffic only need the normal Ø60 cm format: the class I sheeting version is the C1. The small Ø40 cm format (C1_40_I) is only for low-traffic rural tracks.
It goes at the start of a road section that no vehicle may enter, while traffic from the opposite direction is still allowed, and at the far end of a one-way road. Depending on the case, the P18 (vehicle categories exempted from the sign), P33 (road closed to public traffic), P34 (except residents) or P35 (except authorised vehicles) additional panels can go under it.
It is larger than the C1: Ø80 cm instead of Ø60 cm, and the class II (RA2) prismatic sheeting returns three to four times more light, with a guaranteed 10-year service life instead of 7.
No. SR 1848-2 forbids using signs smaller than the format set for the road's category. National roads require the large Ø80 cm format, and motorways the very large Ø100 cm format.
SR 1848-2 requires prismatic class 2 or 3 sheeting in areas with many light sources: street lighting, shop windows, advertising, dense urban areas. Elsewhere, class II is chosen for better visibility on fast roads and where the sign is seen at an angle.
The pack holds 2 clamps for Ø48 mm posts and 4 bolts with nuts. Clamps for Ø60 mm posts are available on request, a better fit for large signs or windy locations.
Depending on the case: P18 (vehicle categories exempted from the sign), P33 (road closed to public traffic), P34 (except residents) or P35 (except authorised vehicles).
The post is ordered separately. For a fixed installation in a concrete foundation: the galvanised Ø48 mm post, 300 cm. For temporary use, with no foundation: the Ø48 mm tripod post, 120 cm. On concrete or paving, where you cannot dig: the Ø60 mm flange post, 300 cm, bolted down, for which you ask for the Ø60 mm clamps when you order.
Yes. It is CE marked and complies with SR EN 12899-1:2007, the European standard for vertical road signs, and with SR 1848-1:2024, SR 1848-2:2011 and SR 1848-3:2011. The sheeting and the paint resist UV and weathering.
Yes. You order directly on the site, as an individual or a company, and pay by card or cash on delivery.
Yes. Every order comes with a tax invoice, issued to an individual or a company.
Yes. Public institutions find us in SICAP as S.C. ATTO REGAL S.R.L. Our company details are on the Purchase through SEAP / SICAP page.
We deliver by courier within 24-48 hours.
Yes. As a private individual you can return the product within 14 days of receiving it, as the law provides, and you get your money back within 14 days of telling us. Return shipping is paid by the customer. The full terms are on the Return policy page.
Get a personalised offer, transport included.
Sending this form is not an order.
We will send you the offer, transport included, as soon as possible by email or phone.
Atto Trafic supplies complete road signage and safety equipment — signs, traffic signs, markings, parking barriers, speed bumps, mirrors, bollards and accessories.